Product Code: hose-clip
Availability: In Stock In Stock
£1.25 inc vat

Qty

A 10mm jubilee hose clip for securing LPG gas hose to a regulator or appliance connection — a simple, essential spare.

Currently Available Delivery Options:

  • Standard Delivery
    Greater London Area Only
    Free
  • Pickup From Depot
    (Greater London, RM6 5QT)
    Free

Hose Clip Suitable for 8mm Hose

It's a 10mm jubilee clip sized for the standard 8mm bore LPG hose used on BBQs, patio heaters and gas fire pits. The clip tightens over the hose where it pushes onto a regulator tail or appliance connection.
One at each end of the hose — one at the regulator and one at the appliance. Hoses are usually supplied with two; it's worth keeping a spare, since the clip is the part most likely to be lost or corroded when a connection is re-made.
Tighten with a screwdriver until the hose is held firmly on the tail without cutting into the rubber. Then brush soapy water over the joint with the gas turned on — bubbles mean it's leaking, so turn the gas off and re-seat the connection.
Replace the clip if it's corroded or the screw thread is worn, and the hose if it's cracked, hardened or perished. Check both at the start of each season and replace the hose in line with the manufacturer's guidance.
Trusted by Thousands
Quick question?
Quick question?
Call - 0800 133 7935
...or send us e-mail
Drop us an email